Hifonics Brutus Series, Руководство пользователя

Страница: 23 / 32

23
FUNCTIONAL INSTRUCTIONS
INTERCONNECTION EXAMPLE
Master/Slave mode: subwoofer operation with two amplifiers
INTERCONNECTION MASTER
• Connect the RCA lineouts of the head unit with the RCA jacks LINE IN of the amplifier with appropriate high-value RCA cables.
If your head unit is equipped with a additional subwoofer lineout (SUB OUT), it is recommended to use this lineout.
• Connect the remote wire (REM) to the remote terminal (REM) of the MASTER amp.
• Connect the bass remote wire only on the REMOTE port of the MASTER amp.
INTERCONNECTION SLAVE
• Connect the RCA jacks SLAVE IN/OUT of the MASTER amp with the RCA jacks SLAVE IN/OUT of the SLAVE amp with appropriate
high-value RCA cables.
• Connect the remote wire (REM) of the remote terminal (REM) of the MASTER amp with the remote terminal (REM) of the SLAVE amp.
Use therefore cable with a minimum profile section of 0,5 mm
2
.
INTERCONNECTION SUBWOOFER
• Refer to page 24.
SETTINGS MASTER
• The MODE switch should be in MASTER position.
Refer to LP, SUB SONIC, PHASE, LEVEL, SUB BOOST, FREQ RANGE, Q-CONTROL and BASS REMOTE on page 22.
SETTINGS SLAVE
• The MODE switch must be in SLAVE position.
In the SLAVE mode all controllers of the SLAVE amp are without function.
Only the already modified audiosignal of the MASTER amp will be amplified.
Connect Bass Level
Controller with the
enclosed cable
Connect Stereo RCA output (SLAVE IN/OUT) of the MASTER
amp with the SLAVE IN/OUT of the SLAVE amp
POWER INPUT
SPEAKER OUTPUT
PROTECT
POWER
SLAVE MASTER
LP LEVEL
BASS LEVEL
CONTROLLER
AUTO TURN ON
(ONLY IN HI LEVEL INPUT MODE)
0dB 18dB
LINE IN SLAVE IN/OUT
LEVEL
INPUT
MODE
35Hz 250Hz
L
R
MIN MAX
OFF
ON
LOW
HI
SUB
BOOST Q-CONTROL PHASE
FREQ.
RANGE SUB SONIC
15Hz 55Hz
GND +12V REM
EXTENDED BASS CONTROL
WIDE NRW 20Hz 80Hz 0 ° 180 °
BALANCED
INPUT
BRX4000 D
L
R
BRX4000 D
BLUE / WHITE
LOG0
POWER INPUT
SPEAKER OUTPUT
PROTECT
POWER
SLAVE MASTER
LP LEVEL
BASS LEVEL
CONTROLLER
AUTO TURN ON
(ONLY IN HI LEVEL INPUT MODE)
0dB 18dB
LINE IN SLAVE IN/OUT
LEVEL
INPUT
MODE
35Hz 250Hz
L
R
MIN MAX
OFF
ON
LOW
HI
SUB
BOOST Q-CONTROL PHASE
FREQ.
RANGE SUB SONIC
15Hz 55Hz
GND +12V REM
EXTENDED BASS CONTROL
WIDE NRW 20Hz 80Hz 0 ° 180 °
BALANCED
INPUT
BRX4000 D
L
R
BRX4000 D
BLUE / WHITE
LOG0
POWER INPUT
SPEAKER OUTPUT
PROTECT
POWER
SLAVE MASTER
LP
LEVEL
BASS LEVEL
CONTROLLER
AUTO TURN ON
(ONLY IN HI LEVEL INPUT MODE)
0dB 18dB
LINE IN SLAVE IN/OUT
LEVEL
INPUT
MODE
35Hz 250Hz
L
R
MIN MAX
OFF
ON
LOW
HI
SUB
BOOST Q-CONTROL PHASE
FREQ.
RANGE SUB SONIC
15Hz 55Hz
GND +12V REM
EXTENDED BASS CONTROL
WIDE NRW 20Hz 80Hz
0 ° 180 °
BALANCED
INPUT
BRX4000 D
L
R
BRX4000 D
BLUE / WHITE
LOG0
POWER INPUT
SPEAKER OUTPUT
PROTECT
POWER
SLAVE MASTER
LP
LEVEL
BASS LEVEL
CONTROLLER
AUTO TURN ON
(ONLY IN HI LEVEL INPUT MODE)
0dB 18dB
LINE IN SLAVE IN/OUT
LEVEL
INPUT
MODE
35Hz 250Hz
L
R
MIN MAX
OFF
ON
LOW
HI
SUB
BOOST Q-CONTROL PHASE
FREQ.
RANGE SUB SONIC
15Hz 55Hz
GND +12V REM
EXTENDED BASS CONTROL
WIDE NRW 20Hz 80Hz
0 ° 180 °
BALANCED
INPUT
BRX4000 D
L
R
BRX4000 D
BLUE / WHITE
LOG0
Connect Stereo RCA output (L/R or SUB OUT)
of the head unit with the LINE IN CH1/2
of the MASTER amp
REM cable
MASTER SLAVE