manualshive.com logo in svg

Hidea HDF2.5, Руководство пользователя, Страница: 49 / 57

Поделиться
Скачать
Hidea HDF2.5 Скачать руководство пользователя страница 49

Trouble Recovery

Q. Is fuel contaminated or stale?

A. Fill tank with clean, fresh fuel.

Q. Is fuel filter clogged?

A. Clean or replace filter.

Q. Have ignition parts failed?

A. Have serviced by a yours dealer.

Q. Has warning system activated?

A. Find and correct cause of warning.

Q. Is spark plug gap incorrect?

A. Inspect and adjust as specified.

Q. Is ignition wiring damaged or poorly connected?

A. Check wires for wear or breaks. Tighten all loose connections. Replace worn or broken wires.

Q. Is specified engine oil not being used?

A. Check and replace oil as specified.

Q. Is thermostat faulty or dogged?

A. Have serviced by a yours dealer.

Q. Are carburetor adjustments incorrect?

A. Have serviced by a yours dealer.

Q. Is fuel pump damaged?

A. Have serviced by a yours dealer.

Q. is air vent screw on fuel tank closed?

A. Open air vent screw.

Q. Is choke knob pulled out?

A. Return to home position.

Q. is motor angle too high?

A. Return to normal operating position.

Q. Is carburetor clogged?

A. Have serviced by a yours dealer.

Q. Is fuel joint connection incorrect?

A. Connect correctly.

Q. is throttle valve adjustment incorrect?

A. Have serviced by a yours dealer.

Q. Is battery cable disconnected?

A. Connect securely.

45

Содержание HDF2.5


























































Отзывы:

Нет отзывов