Hidea HDF2.5 Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 57

Hidea HDF2.5 Скачать руководство пользователя страница 29

Operations

4. Close the fuel cock

5. Tilt support bar equipped models: Hold the rear of the top cowling or the carrying handle with

one hand and tilt the outboard motro up fully until the tilt support bar automatically locks.

6. Tilt support knob equipped models: Hold the rear of the top cowling with one hand, fully tilt

the outboard mortor up, and push the tilt support knob into the clamp bracket.

7. Tilt support lever equipped models: Hold the carrying handle and tilt the engine up fully until

the tilt support lever automatically locks.

Procedure for tilting down

1. Slightly tilt the outboard motor up.

2. If equipped with the tilt support bar:Slowly tilt the outboard motor down while pulling the tilt

support bar lever up.

3. If equipped with the tilt support knob:Pull the knob out, and then slowly tilt the outboard motor

down.

4. If equipped with the tilt support lever: Slowly tilt the outboard motor down while pulling the

tilt support lever up.

25

«
...
27
28
29
30
31
...
»

Содержание HDF2.5


























































Отзывы:

Нет отзывов