Basic components
Throttle grip
The throttle grip is on the tiller handle. Turn the grip counterclockwise to increase speed and
clockwise to decrease speed.
Throttle friction adjuster
A friction device provides adjustable resistance to movement of the throttle grip or the remote
control lever, and can be set according to operator preference.
To increase resistance, turn the adjuster clockwise. To decrease resistance, turn the adjuster
counterclockwise.
1. Throttle friction adjuster
2. Engine stop lanyard switch
WARNING
Do not over tighten the friction adjuster. If there is too much resistance, it could be difficult to
move throttle lever or grip, which could result in an accident.
When constant speed is desired, tighten the adjuster to maintain the desired throttle setting.
Engine stop lanyard switch
The stop switch lock must be attached to the engine stop switch for the engine to run. The hook
should be attached to a secure place on the operators clothing, or arm or leg. Should the operator
fall overboard or leave the helm, the hook will pull out the stop switch lock, stopping ignition to
the engine. This will prevent the boat from running away under power.
2
1
9