June 2016
Page 7 of 25
OMNIKEY 5121 Ethernet Encoder User Guide, L001436, Rev. 2.0
4.
The Installing Screen will be displayed until the installation is complete. Installation
progress will be indicated via the progress bar in the left side panel.
5.
When the installation is complete the Setup Complete Screen will be displayed, as shown
below.
6.
Ensure the
Run the OMNIKEY 5121 Ethernet Driver Utility to add an encoder
option is
checked to start the utility once the installation program completes.
7.
Click
Finish
to close the installation program.
