manualshive.com logo in svg

HID Fargo DTC1000Me, Руководство пользователя

Поделиться
Скачать
HID Fargo DTC1000Me Скачать руководство пользователя страница 74

Page 5-10

December 2016

System Overview - Troubleshooting

PLT-01668, Version: 1.2 

5.2.4

Printer-Specific Tools (DTC1250E, DTC4250E)

The status icons are as follows:

Press the 

button to scroll through the details of the printer and perform the action.

Press the 

 button to select the option.

When 

 is selected, use the left down arrow 

 to scroll through the Info, Test Prints, 

and Languages and Exit.

Use the corner arrow 

 to run that option.

The curved arrow 

 will return to the first screen.

This icon indicates that the print ribbon supply is low and will require 
replacement soon. For the DTC1250E and DTC4250E models, the entire ribbon 
cartridge must be replaced.

This icon indicates that the printer needs to be cleaned.

This icon is only displayed for printers with an attached dual-input card hopper 
and indicates that the top input hopper is currently selected.

This icon is only displayed for printers with an attached dual-input card hopper 
and indicates that the bottom input hopper is currently selected.

Содержание Fargo DTC1000Me





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды