manualshive.com logo in svg

HID Fargo DTC1000Me, Руководство пользователя

Поделиться
Скачать
HID Fargo DTC1000Me Скачать руководство пользователя страница 13

December 2016

Page 1-9

PLT-01668, Version: 1.2 

Specifications

1.4

Functional Specifications

This card printer utilizes two different, yet closely related printing technologies to achieve its 
remarkable direct-to-card print quality for dye-sublimation and resin thermal transfer. 

1.5

Printer Components: Print Ribbons

The card printer utilizes both dye-sublimation and/or resin thermal transfer methods to print images 
directly onto blank cards. Since the dye-sublimation and the resin thermal transfer print methods each 
provide their own unique benefits, print ribbons are available in resin-only, dye-sublimation-only and 
combination dye-sublimation/resin versions. 

To make it easier to remember which print ribbons are which, a letter code has been developed to 
indicate the type of ribbon panels found on each ribbon. This letter code is as follows: 

 = Dye-Sublimation Yellow Panel 

 = Dye-Sublimation Magenta Panel 

 = Dye-Sublimation Cyan Panel 

 = Resin Black Panel (Premium unless otherwise stated) 

 = Clear Protective Overlay Panel 

 = Fluorescing Panel 

Options

Single wire Ethernet and USB 2.0 Interface for inline printing and encoding
Single wire Ethernet encoding is only available for iCLASS and Contact Smart 
Card encoding 
Dual-Sided Printing Module – Upgradable 
Dual Input Card Hopper – Upgradable (DTC4250e) 
Same-Side Input / Output Card Hopper – Upgradable (DTC4250e) 
Smart Card Encoding (contact/contactless) – Upgradable
Magnetic Stripe Encoding – Upgradable 
Printer Clearing Kit

Software

FARGO Workbench Diagnosis Utility

Display

Color changing status buttons (DTC1250E, DTC4250E)
Graphical Display (DTC4250E)

Term

Function

Содержание Fargo DTC1000Me





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды