1.
The rated output power is reached, but the coverage is not enough or the
signal in specific areas isn’t improved:
•
Check whether the indoor antenna is installed correctly or not, try to
change the antenna position to improve coverage.
•
Check if it is necessary to adjust the direction of the indoor antenna.
•
Check whether it is necessary to add more indoor antennas since barriers
block the signal.
2. The rated output power is not reached.
•
Change the position or direction of the outdoor antenna to get a stronger
receiving signal in order to get higher output power (not necessarily to
reach rated value as long as the coverage is enough)
•
Check LCD display, if the reading gain is less than rated value and "ISO" is
flashing, it means the gain is reduced by
ISO function
for not having
enough isolation.
Measures:
The actions mentioned below are recommended to eliminate ISO
problems and increase the gain:
•
Adjust the antennas’ direction or location or enlarge the distance between
them.
•
Add the vertical or horizontal distance between outdoor antenna and
indoor antenna.
•
Use some barrier like walls to increase the isolation.
•
Change indoor antenna(indoor antenna can be changed to other
antenna type which has better directional pattern), also you can point
outdoor antenna and indoor antenna in the opposite direction.
•
Reduce the booster’s downlink gain with a knob. Keep the uplink and
downlink attenuation value the same, then restart the booster.
21
