More about LCD indication:
LCD
Status
Meaning
Solve methods
“---” status
Output power is
lower than
-10dBm
Check coverage, leave it if it is
good; take below actions to
increase signal if coverage is not
good.
1. Adjust the antenna direction or
location to get stronger receiving
signal
2. Replace current antenna with
higher gain to get stronger
receiving signal
“OFF”
status
Actual gain is
more than
51dB less than
rated gain
Severe loop
back or
self-oscillation or
output power is
severe over
rated to lead
that
the repeater
breaks down.
Not working properly, below
mentioned actions are
recommended :
1.
Adjust the antennas’ directions
or locations to decrease input
power or enlarge the distance.
2.
Add the vertical or horizontal
distance between outdoor and
indoor antennas.
3.
Use the barrier like walls to
increase the isolation.
4.
Reduce the booster’s gain by
external attenuator or replace
with lower gain antenna if the
above methods don’t work.
Flashing
LCD
screen
24
