More about "ISO" indication
ISO status indicates if the booster has enough isolation between outdoor and
indoor antennas in order to avoid loop back or so-called self-oscillation.
Thanks to intelligent software, HiBoost is fully protected from interference with
operator mobile networks. "ISO" flashing on LCD display means that ISO
function is working great and the self-oscillation has been eliminated.
LED
Status
Meaning
Solution methods
ISO
status
Remain still
No loop back
or no
self-oscillation
NO action is needed
Flashing but actual gain is not
more than 30dB and less than
rated gain
Slight loop
back or
self-oscillation
NO action is needed
Flashing but actual gain is
more than 30dB
Deep loop
back or
self-oscillation
The actions mentioned below are
recommended:
1.
Adjust the antennas’ directions or
locations to enlarge the distance
between them.
2.
Enlarge the vertical or horizontal
distance between outdoor and
indoor antennas.
3.
Use the barrier like walls to
increase the isolation.
4.
Reduce the booster’s gain by
external attenuator or replace
with lower gain antenna if the
methods listed above don’t
work.
22
