Install Hiboost Booster System
Before You Install
•
Make sure you have sufficient cable length between the outdoor/indoor
antennas and the booster in case you have not a standard kit
•
Make sure the place where you install the booster is near to one existing
electrical outlet. It should also be well ventilated, away from excessive heat,
moisture, and direct sunlight.
Installation tools and accessories:
No.
Name
Specification
Quantity
Remark
1
Plastic expansion bolt Φ8
5
Standard accessories
2
Tapping screw
M6*50
4
Standard accessories
3
Hanging folder
1
Standard accessories
4
Reciprocating drill
1
Provided by engineer
5
Shot bit
Ø8
1
Provided by engineer
Installation Overview
Installation is easy to perform even without professional help in 4 simple steps:
Step1.
Fix the outdoor antenna in some high point outside your house where you
can gain best signal reception (e.g. on the roof, outside the window, etc.).
Step2.
Mount the indoor antenna where you want to improve poor signal.
Step3.
Install the booster inside your area and connect it to the antennas through
the cables.
Step4.
Plug in the booster to a power supply and self-adaptive system will
automatically adjust best performance in 30 seconds.
(NB! Before you plug it in,
make sure all the cables are connected firmly!)
.For more details refer to “
Booster
Commissioning
”.
13
