Hi-Link HLK-WIIF-M04 Скачать руководство пользователя страница 11

Страница: 11 / 92

wireless network and server each time. As in the auto mode, the module's serial always

work in the transparent transfer state, so users only need to think of the module as a virtual

serial cable, and send or receive data as using a simple serial. In other words, the serial

cable of users’ original serial devices is directly replaced with the module, user equipments

can be easy for wireless data transmission without any changes.

In this mode, the module supports the trigger length and trigger time of auto forming a

frame, Trigger length means that the module receives from the serial a specified length of

data,then forms a wireless data frame, and immediately start the network sending process.

Trigger time means, when the data received from the serial is less than the specified length,

the module will force to form a frame with the current data and start to send after the

specified time.

In this mode, the module serial supports hardware flow control, provides normal RTS

/CTS signals, it’s strongly recommended when doing large amounts of data, hardware flow

control should be enabled, so as to fully ensure reliable data transmission. In the

applications which doesn’t need flow control, users can simply leave RTS / CTS pin vacant.

2.3.3

36B44B44B44B

Command Mode of Serial

Module also provides the command mode based on serial control, which is different

from auto-work mode,this mode provides the user with sufficient flexibility, and meet users’

specific needs of different applications.

In this mode, the module works according to user command through the serial, user

can control the module completely with the command, including modifying parameters,

controling networking, controling TCP/IP connection and data transmission. This is a

high-level use, and also the most flexible to use. Users can discretionarily control the

connection and disconnection of the wireless network with command, also can create

several different types of TCP / IP connections at the same time and keep them transfering.

However, this model also requires the user has full understanding of control protocol of the

module's AT+Instruction set, and have a basic use knowledge of wireless network and

TCP/IP network.

This module beds a set of AT+Instruction used for system control and parameter

configuration command (see Article VI), all instructions are based on ASCII code, using

Windows Super Terminal program can directly control module with command, it’s

convenient for debugging and using.

2.3.4

37B45B45B45B

TCP/IP Protocol stack

This module contains a complete TCP / IP protocol stack, and it supports the TCP/UDP

Содержание HLK-WIIF-M04





























































































Результаты поиска

Содержание HLK-WIIF-M04

Отзывы:

Похожие инструкции для HLK-WIIF-M04

Бренды по названию

Популярные бренды

Hi-Link HLK-WIIF-M04, Руководство пользователя

Результаты поиска

Содержание HLK-WIIF-M04

Отзывы:

Похожие инструкции для HLK-WIIF-M04

Бренды по названию

Популярные бренды