Hi-Link HLK-WIIF-M04, Руководство пользователя

Страница: 42 / 92

4
3B4B4B4B
Configuration management manual
4.1
15B18B18B18B
Configuration through configuration management software
4.1.1
52B64B64B64B
Introduction
We offer a configuration hypervisor that can manage HLK-WIFI-M04 module
expediently
，
for configuration querying
、
config
、
function test etc
，
its main function includes,

module management

managemant through serial

managemant through wireless connection

parameter configuration

modify/query module parameters

import/export parameters

modify parameters for a group of modules

resume to default setting

function test

wireless network command test

socket command test

AT+ instruction test

firmware upgrade

system information query
4.1.2
53B65B65B65B
Module management
4.1.2.1
117B141B141B141B
Management through serial connection(use serial to config)
NOTE :
When you power on the HLK-WIFI0-M04,You should to escape the auto
mode.That is you should click “exit”button,and then click the “search” button.
1
、
Connect the HLK-WIFI-M04 module to your PC
，
then turn it power-on
；
2
、
Open the UART-WIFI configuration hypervisor
，
select the port number of connection
from port list
，
you can select ‘auto’ unless you make sure
；
3
、
Click ‘search module’
，
if the connection port is selected to ‘auto’ and the computer has
more than one serial
，
it maybe expend a long time for searching, The following sketch
map will show after search completed
：