5B6B6B6B
Appendix A
Frequent Questions and Answers
6B7B7B7B
Q1:
Why can not the module search for the specified network?
A:
The channel list user set doesn’t contain the channel which the specified
network work in.
20B24B24B24B
Q2:
Why can not the module join in the network?
A: Please go through the following reasons,
Whether the parameters SSID,Key,Channel and so on are consistent with the AP sets
or
not.
Whether the module is specified BSSID ,and the BSSID is not consistent with the AP
sets.
21B25B25B25B
Q3:
Why does the module need about 10 seconds to response the
command or connect to network automatically, when encryption mode is set
to WPA/WPA2?
A: When encryption mode is set to WPA/WPA2,as the key format is ASCII, the module
must first do the conversion to the key of ASCII format when it’s power-on, this process
increases about 10 seconds to the starting time.And When using WPA/WPA2 encryption,
directly using PMK of hexadecimal format can eliminate this delay.
(use this please connect to
hi-link:[email protected])
Содержание HLK-WIIF-M04
Страница 15: ...4 Then click search modules as shown below...
Страница 56: ...figure5 16 query the receiver buffer figure5 17 socket receiving...
Страница 62: ...figure5 23 instruction test...