Operating Instruction Manual:
OM-TPA-A-01
Serial Numbers:
All
6
ALWAYS
disconnect the pump from the air supply when carrying out maintenance or adjustments
(except pressure relief valve adjustments)
This pump is
NOT ATEX RATED
I.e.
NOT
suitable for work which takes place in explosive
environments.
Failure to observe and obey the following safety precautions could result
in property damage, equipment damage or minor / moderate personal
injury;
ALWAYS
stand the pump on a stable, level surface during operation.
BEWARE
of hot surfaces on the motor.
DO NOT
obstruct the flow of cooling air around the motor.
To protect your warranty, only use the hydraulic oil grade specified in Section 5.2.
3.0 Declaration of Incorporation / Conformity
Hi-Force declares that this product has been tested and complies with the standards set out in the relevant
EU directives. The EU Declaration of Incorporation / Conformity is included as Annex A to this instruction
document and is supplied with all shipments of this product.
