Operating Instruction Manual:
OM-TPA-A-01
Serial Numbers:
All
1
OPERATING INSTRUCTION MANUAL
TPA-A SERIES | AIR DRIVEN TORQUE WRENCH PUMPS
- PREMIUM LINE (ANALOGUE)
Hi-Force TPA series Air Driven Torque Wrench Pumps are premium pumps designed for use with Hi-Force
Hydraulic Torque Wrenches. TPA Pumps can be used to power up to 4 torque wrenches simultaneously
(all operating at the same pressure). Output pressure is fully adjustable and can be set to any value up to
a maximum working pressure of 700 bar (10,000 psi). This manual applies to the Hi-Force TPA series
Analogue Air Driven Torque Wrench Pumps Only. It contains the latest product information available at the
time of publication and approval. For information relating to the servicing of an Air Driven Torque Wrench
Pump, see the servicing instructions, which are available on the Hi-Force website. Hi-Force reserves the
right to make changes to this document at any time without notice.
This
‘Original instructions’ document assumes that the operator carrying out any operation with this
product is trained and competent to do so. This manual does not attempt to cover all details or variations
in the equipment. Nor does this manual claim to provide for every possible contingency met in connection
with the installation, operation, or maintenance thereof. Should further information be desired, or should
a particular problem arise which is not covered in sufficient detail, the matter should be referred to
Hi-Force.
