Chapter
4
4 Installation
4.1
Ultrastar Serv24 Installation Overview
Table 9: Require Equipment
Notes
Number Needed
Equipment
The #2 Phillips Screwdriver is
used to install the provided screws
into the rack mounted rails.
1
#2 Phillips Screwdriver
Once the entire contents of the system are unpacked and accounted for, the installation process for the
Ultrastar Serv24 can begin. Start by installing the rails into the rack, followed by the in installation of the chassis
that contains the PSUs and drives pre-installed. Finally, the CMA, power cables, and other cabling should be
connected to the rear of the enclosure.
4.2
Ultrastar Serv24 Installation Procedure
1.
Remove the inner rail.
a) Extend the inner portion of the rails until they lock in place.
Figure 6: Inner Rail Removal
20
4
Installation
Installation Guide
4.1
Ultrastar Serv24 Installation Overview
