Note: The BIOS may take up to five minutes to
appear.
Figure 24: BIOS
3.
When the Setup Utility appears, press the right arrow to move over to the Server Mgmt tab.
Figure 25: Setup Utility
4.
Press the down arrow until the BMC network configuration is selected and press Enter.
Figure 26: BMC network configuration
5.
Record the Station IP address that appears in the Dedicated Link section.
Note:
• This IP address will be used to connect to the enclosure through the BMC WebUI.
32
5
Initial Bringup
Installation Guide
5.1
Bringing Up the Enclosure
