11
5 | Using your electric scooter for the first time
5.1 | Inspecting the electric scooter before first use
• Is the steering column locked and secured?
• Are the handlebar, controls and grips firmly tightened?
• Are the cables on the steering column free of kinks and routed so that they are not put under any
strain when you turn the steering to full lock?
• Are the wheels securely screwed on and the tyres pumped up (pressure for cold tyres should be
from 2 to 3 bar front and rear, depending on what feels comfortable)?
• Are all screws and the non-slip covering on the footboard firmly secured?
• Does the bell work?
• Do the brakes work? Is the rear wheel brake properly adjusted (sufficient but not excessive lever
travel so that you get the max. braking effect just before the lever touches the handlebar)
• Is the battery fully charged (see Section "Charging the battery").
5.2 | Switching the electrical system and display on/off
To switch on the electrical system, press and hold the round button (4) in the middle of the
handlebar until the display comes on. Press the button again once to switch on the lights. Press the
button twice in quick succession to toggle between the mode (2) for reduced speed (up to 15 km/h,
the left-hand blue diode lights up) and for max. speed (20 km/h, the right-hand red diode lights up).
To switch off, press and hold the button (4) until the system, the display and the lights are
switched off.
The button commands are each accompanied by a beep.
5.3 | Charging the battery
WARNING!
Risk of fire!
Charging must only be carried out in dry, frost-free rooms and under supervision.
The charger and the electric scooter must not be covered during charging (risk
of short-circuit and fire), and both must be placed on a non-flammable surface.
The electric scooter's battery is permanently installed in the vehicle frame
underneath the footboard. It has a charge of approximately 75% when the
scooter is delivered. There is a charging port at the front of the footboard for
topping up the charge. A full recharge takes approximately 3.5 - 4 hours.
Name INSTRUCTION_02
Date
17-02-20
Scale
1.000
1
2
3
4
1. Speed display in km/h
2. Riding mode display
3. Battery capacity
4. Power button
Содержание 10015300
Страница 2: ......
