16
• Check cables and electrical connections (including in the battery compartment) for damage
• Test the charger; check that charging works correctly
• Check frame for damage (e.g. cracks, twisting)
• Check covering on the footboard
• Defective or missing parts must be replaced
• Lubricate moving parts on the scooter
11 | Maintenance
While it is imperative that servicing is carried out by a specialist workshop, you can do maintenance
work yourself if you have the appropriate skills
11.1 | Adjusting the brake
The procedure for adjusting the response of the rear disc brake is as follows.
Use the 5 mm hexagon key supplied to unfasten the two screws that secure the brake caliper, and
then align the brake caliper parallel to the brake disc so that the brake disc and rear wheel run freely.
Then tighten the two screws again, without overtightening.
If the brake lever has too much travel, use the 5 mm hexagon key to unfasten the screw on the
cable tensioner and pull the brake cable a little further. The brake pads must not grind, and the gap
between pad and brake disc should not be more than 1 mm. Then re-tighten the screws (5 Nm max.).
Содержание 10015300
Страница 2: ......