English
English
GB
1. GROUP I (about 9 to 18 kg Y)
1.1. Using
HEYNER
HEYNER
®
MultiProtect
ERGO SP
as a child car seat
You have purchased
HEYNER
HEYNER
®
MultiProtect
ERGO SP
car seat for your child. We thank you
for your trust. Please note, that the optimum safety characteristics can only be achieved, if the
seat is used properly according to instructions. Therefore we ask you to ensure the correct
installation of the seat in your vehicle by reading the operating instructions carefully. Please
keep instructions always with the seat for further information. Only to be assembled by adults!
Connecting the backrest to the booster seat (fig.26) (just if non-assembled)
If backrest (B) and booster (C) are delivered in a non-assembled way, please follow these
instructions to connect both together before using it for children in group I, II & III:
Lay down the booster on the floor and the backrest flat right behind. Then thread the connecting
hooks (R) on the bottom of the backrest into the fitting holes (S) on the back of the booster (C)
with a firm downwards motion. Now bring the backrest slowly upright 90° to the booster. The
connecting hooks should now slip into the fitting holes with an audible sound. As a result the
backrest should be well fixed to the booster in the upright position. It must not slip away now.
Otherwise you may not have fixed it very well and using it would be dangerous. In this case
please repeat the first steps of this part of the instruction.
1.2. Adjusting
HEYNER
HEYNER
®
MultiProtect
ERGO SP
to your child's size
1.2.1. Preparation (fig.1a-c)
HEYNER
HEYNER
®
MultiProtect
ERGO SP
is equipped with a head cushion and a reduction cushion, to
assure special protection of small children starting from 9kg weight. In case the head rest (A)
HEYNER
HEYNER
HEYNER
HEYNER
HEYNER
HEYNER
HEYNER
HEYNER
HEYNER
11
12
Index / page
1. GROUP I (about 9 to 18 kg Y)
S. 12
1.1. Using
HEYNER
HEYNER
®
MultiProtect
ERGO SP
as a child car seat
S. 12
1.2. Adjusting
HEYNER
HEYNER
®
MultiProtect
ERGO SP
to your child's size
S. 12
1.3. Installing
HEYNER
HEYNER
®
MultiProtect
ERGO SP
into your car
S. 14
1.4. Securing the child into
HEYNER
HEYNER
®
MultiProtect
ERGO SP
S.
16
2. GROUP II+III (about 15 to 36 kg)
S. 17
2.1. Using
HEYNER
HEYNER
®
MultiProtect
ERGO SP
without harness belts
S. 17
2.2.
Adjusting
the
headrest
S.
18
3.
Care
instructions
S.
19
4.
Important
notices
S.
19
5.
Some
final
hints
S.
20
A Headrest
B Backrest
C Booster
D Harness
belt
D1 Shoulder
belt
D2 Waist
belt
D3
Harness central belt
D4 Buckle
belt
E Buckle
latches
F Belt
buckle
G Belt
hook
H Belt
adjuster
I
Belt end element
J
Shoulder belt slots
J3
for children up to 3 years
(children about 14 - 18 kg)
J2
for children up to 2 years
(children about 12 - 14 kg)
J1
for children up to 1.5 years
(children about 9 - 12 kg)
K Belt
anchorage
L
Fixation lugs for three-point-vehicle-belt
M Belt
clip
N
Diagonal belt of the three-point-vehicle-belt
O
Lap belt of the three-point-vehicle-belt
P
Buckle latch of the three-point-vehicle-belt
Q
Belt buckle of the three-point-vehicle-belt
R Connecting
hooks
S Connecting
holes
T
Backrest cover velcro
U
Booster cover velcro
V
Backrest cover button
W
Shoulder pad connector
X
Belt anchorage of waist belt
Y
Belt anchorage of buckle belt
Z
Head rest de-block lever
HEYNER
HEYNER
HEYNER
HEYNER
HEYNER
HEYNER
HEYNER MOBIL AUTOMOTIVE GMBH
HEYNER
HEYNER
HEYNER MOBIL AUTOMOTIVE GMBH