Configuration and Operations
LD900 Installation and Oper ations M anual
42
4.6.2.5
Configuration > Corrections > RTK
The LD900 is capable of using RTK corrections from a suitable source.
RTK Source
controls if RTK corrections
are used by the system, where corrections are available. This can be set to
Off
(default) or
RTCMV3
. For the
corrections to be accepted by the receiver they must be provided in RTCMv3 format. To input RTK corrections a
port must be configured to receive the corrections.
Press tick to select
Edit
and use the arrow buttons to select
Off
or
RTCMv3
as required. Then use the arrow
keys and tick to select
Apply
, right to select
Yes
and tick to apply the required change:
4.6.2.6
Configuration > Corrections > NTRIP
The LD900 is capable of using VERIPOS RTCM corrections via NTRIP.
NTRIP Mode
controls if an NTRIP
correction source is used by the system. This can be set to
Off
(default) or
On
. The NTRIP service requires to
be activated through service activations from the VERIPOS Helpdesk.
Press tick to select
Edit
and use the arrow buttons to select
Off
or
On
as required. Then use the arrow keys
and tick to select
Apply
, right to select
Yes
and tick to apply the required change:
