LD900 Installation
LD900 Installation and Oper ations M anual
25
3.5 Ventilation Requirements
The LD900 needs 15-25mm minimum clearance all-round to allow a f low of air:
3.6 Antenna Installation
This section provides general guidance on the installation of antennas and cabling when installing the LD900
receiver. It is important to the on-going performance of your system that a high-quality installation is performed,
as this will ensure optimum performance and reliability.
3.6.1 Antennas
The antennas supplied with the LD900 are detailed below, these will vary depending on the LD900 model:
V560
V86
Primary Tracking:
GPS, GLONASS, BeiDou,
Galileo & QZSS
L-band
Ancillary Tracking:
L-band & MF Beacon
MF Beacon
NOTE
The LD900
menu page defines which RF port should be used for connecting the primary
tracking antenna.
If the default of GNSS1 is selected as the L-band source antenna, the L-band RF connector will not be
capable of providing L-band tracking functionality.
15-25mm
15-25mm
15-25mm
