Hexagon Leica Nova MS60, Руководство пользователя

Страница: 61 / 94

9. Select Finish to accept the results. No more runs can be added
later.
OR
Select Redo to decline all measurements and to repeat all calibra-
tion runs.
IF the results are THEN
to be stored Next overwrites the old tilting axis error with
the new one.
to be determined again Redo rejects the new determined tilting axis
error and repeats the whole procedure.
Refer to paragraph Tilting Axis Adjustment
(a) .
5.5 Adjusting the Circular Level of the Instrument and Tribrach
b 5b
4
5b
4
008704_001
2
1
1. Place and secure the instrument into the tribrach and onto a tripod.
2. Using the tribrach footscrews, level the instrument with the elec-
tronic level.
3. Select Settings \ TS instrument \ Level & compensator to access
the Level & Compensator screen.
4. Check the position of the circular level on the instrument and tri-
brach.
5.
a If both circular levels are centred, no adjustments are neces-
sary
b If one or both circular levels are not centred, adjust as fol-
lows:
Instrument : If it extends beyond the circle, use the supplied allen
key to centre it with the adjustment screws. Turn the instrument
by 200 gon (180°). Repeat the adjustment procedure if the circu-
lar level does not stay centred.
Tribrach : If it extends beyond the circle, use the supplied allen
key to centre it with the adjustment screws.
Next step
Adjusting the circular
level step-by-step
Check & Adjust 61