23.04.2014
3 / 21
Maintenance
Design
Evaporator should be cleaned at least 1 per year (before
season) in order to ensure its efficient operation. Cut off
power supply in case of cleaning or maintenance of the
unit subassemblies.
Make sure that the structure holding the unit is firmly fixed
to the wall. The machine should be adequately levelled in
order to ensure correct heat pump operation and proper
condensate discharge.
Power
supply
In case of emergency...
Power supply line should be provided according to the
requirements specified in the Manual and laid so as to
prevent its flooding with water. If it is planned that heat
pump will not be used in winter season, it should be
switched off only through the controller. Do not cut off
power supply.
Earthing is an obligatory element of power supply.
If user observes any alarming symptoms (e.g. noise or
odour) indicating abnormal equipment operation, it is
required to cut off power supply and consult authorised
service centre.
Safety
The unit location
During installation keep to industrial safety requirements
according to current regulations concerning environmental
protection, safety of work, and making of installations and
safeguards.
Install the heat pump in a heated room. If you do not use
the unit in winter, cover air ducts in order to avoid
excessive cooling of room.
THE CE CERTIFICATE
The heat pump is CE marked.
The CE mark confirms the product compliance with regulations applicable in the European Union. The compliance has
been confirmed on the basis of obtained results of tests related to harmonised standards:
PN-EN 60335-1:2004:/A1:2005/A2:2008,
PN-EN 60335-2-40:2004+A1:2006+A2:2009+A11:2005+A12:2005
The tests were performed by an accredited Research Laboratory in Poland.
