Hettich AG, Seestrasse 204a, 8806 Baech, Switzerland
Operator_Manual_Rotolavit II_und_Rotolavit II-S_en_rev2.5
Seite 51
13.3 Changing the fuse
Switch off the mains switch and remove the power plug from the external power supply from the
mains!
Screw the cap from the fuse holder, fig. 7.1, pos. 6, off by turning it counter-clockwise, 1/8-turn, and pull it out
with the fuse. Exchange the defective fuse and tightly screw it including the cap back into the fuse holder by
turning it in clockwise direction.
Only T10A/125VAC, 6.3 x 32 mm fuses with UL and
CSA
approval, (order no. UC.E114)
cap, for fuse holder, 6.3 x 32 mm, (order no. UC.E104)
F10AA/250VAC, 5.0 x 20 mm fuses with UL and
CSA
approval, (order no. UC.E118)
cap, for fuse holder, 5.0 x 20 mm, (order no. UC.E116) may be used.
14 Returning the device / parts of it
If the device, some parts of it or its accessories are returned to Hettich AG or the local supplier, to
provide protection for people, the environment and materials, it must be decontaminated and cleaned
before being shipped, a declaration should to be apply to the device, and respectively to the parts.
Before returning the device, a transport securing part must be installed.
Before returning the device or some parts of it via some local suppliers, you should ask for an RMA-
number (Return Authorization Number)
We reserve the right to refuse contaminated devices or accessories.
Costs incurred for cleaning and disinfection are to be charged to the customer.
15 Storage
Before storing the device, it should be decontaminated and cleaned to protect people, the environment
and property. We suggest putting a declaration onto the device with the date, sign and the solution.
The appliance may only be stored under the following conditions:
- in an enclosed, dust-free room conform to the storage environment, refer to the tech. specifications
(cha. 5, tab. 1)
- frost-free
- disconnected from the power supply
- If the storagetime is longer than 12 months, it’s recommended to remove the battery on the
controller-board
