12/30
The process data operator ID, blood bag and the program number can be scanned in (see note text in the footer
"Awaiting input").
It is not necessary to follow a sequence. For example, you can first scan the program number and then the operator
ID.
The blood bags must be recorded (at least one blood bag) in order to complete the data set and to start the
centrifugation run!
If not all data have been scanned, the centrifugation run cannot be started!
If an incorrect entry is made, the scan process can be reset by scanning the start code again.
Finally, the end code (label with barcode, see enclosed accessories) is expected by the system and can be scanned.
It is required to signal to the system that all data has been scanned.
This means that all data is known to the system.
The lid must be closed to start the centrifugation run (see instructions in footer).
Operator ID was scanned and
recognized.
The first blood bag barcode was scanned
and recognized.
A maximum of 49 blood bag barcodes
can be scanned!
Program number was scanned and
recognized.
