6/30
4
Notes on safety
No claim of warranty will be considered by the manufacturer unless ALL instructions in this manual
have been followed.
•
Before commissioning the data documentation system HettInfo II, the operating instructions are to be
read and observed. Only persons who have read and understood the operating instructions may use the
data documentation system HettInfo II.
•
Along with the operating instructions and the legal regulations on accident prevention, you should also follow the
recognised professional regulations for working in a safe and professional manner. These operating instructions
should be read in conjunction with any other instructions concerning accident prevention and environmental
protection based on the national regulations of the country where the device is to be used.
•
The barcode unit is built according to the state of the art and is safe to operate. However, it may pose a risk to
the user or third parties if it is not used by trained personnel or improperly or for purposes other than those for
which it is intended.
•
The barcode unit must not be operated with highly corrosive substances that can impair the mechanical strength
of accessories.
•
Repairs must only be carried out by personnel authorised to do so by the manufacturer.
•
Only original spare parts and approved original accessories from Andreas Hettich GmbH & Co. KG may be used.
•
The following safety regulations apply:
EN / IEC 61010-1 and EN / IEC 61010-2-020 and their national deviations.
•
The security and reliability of the barcode unit is only guaranteed if:
−
the barcode unit is operated according to the operating instructions.
−
the electrical installation, at the installation site of the barcode unit, meets the requirements of EN / IEC
specifications.
•
Meeting the country-specific requirements concerning occupational safety with regard to the use of laboratory
centrifuges at the workplaces provided for this purpose by the user is the responsibility of the user.
•
HettInfo II only supports SMB protocol version 1.0 for network communication.
•
The HettInfo II system can buffer up to 3000 runs. The data must be transferred to a server at least once a week.
5
Scope of delivery
The following accessories are supplied with the barcode unit.
1 Hand
Barcode
Scanner
1
Holding device for the Hand Barcode Scanner
1
Operating Instructions HettInfo II
