Hettich BlueMax Mini Type 3, Руководство по эксплуатации

Страница: 9 / 40

9
en
The situations above describe some of the residual hazards
which, despite being impermissible, may occur and harm the
health of staff.
The owner must observe the safety requirements defined
in the German Ordinance on Industrial Safety and Health
(Betriebssicherheitsverordnung).
3. Description of the machine
The BlueMax Mini Type 3 is a semi automatic drilling and
insertion machine for panel type workpieces. This machine
must only be used for working on flat panels made of wood-
based materials, such as chipboard, blockboard panels, MDF,
solid wood or similar materials.
All parts being worked on are fed into the machine by hand.
Flat panels made of wood-based materials are laid on the
work table and, by way of option, fixed in place with the
clamping equipment. The drilling process is initiated by
pressing the start button. The start button must remain
pressed until the drilling process has been completed. Using
the integrated insertion facility (optional), the relevant
fittings are pressed into place by means of a manually
operated press in frame (optional). This concludes the
machining process.
Fig. 1: BlueMax Mini Type 3
Fig. 2: BlueMax Mini Type 3 with accessories
g. 1: BlueMax Mini Type 3
Space required by the machine
The space required by the BlueMax Mini Type 3 is largely
determined by the dimensions of the machine base frame.
Machine life
The machine‘s life will depend on whether or not it is used
for its intended purpose, on adherence to regular servicing
intervals and on the regular replacement of expendable parts.
4. Liability
Defects must only be rectified by competent personnel.
Our liability is restricted to damage caused while using
the system in the intended manner. We shall not be liable
for safety defects not yet identifiable on the basis of the
current state of the art.
Failure to:
• observe safety advice for operating personnel
• observe advice on particular hazards
• observe the ban on unauthorised modifications and
changes
• use replacement and expendable parts or auxiliary
materials other than those approved by the manufacturer
will rule out any liability on our part for the
consequences.