Heston Blumenthal Everdure HUB II, Инструкция по сборке, эксплуатации и обслуживанию

Страница: 15 / 24

15
Assembly, Operation & Maintenance Instructions
STEP 08
/ With the barbecue in a secure position, before extending the poles and ignition element,
the unit needs to connect the power first. Fully extend the power cord from the recess
on the right hand side (Do not over extend) and connect to your power supply.
STEP 09
/ Press the “ poles Up Switch” and release them so the first section pops out from the
barbecue. press the poles up or down and it can allocate the poles at any position within
the range of the height settings. The right hand side pole contains the rotisserie motor.
STEP 10
/ Take the rotisserie rod with the food attached and place the pointed end in the motor
hole at the top of the right hand side pole. Lever the handle side of the rod down into
the slot of the left hand and close the pole cover.
Note: It has a safe setting when the rotisserie rod assembly place on the poles, it
is unable to press the down switch to directly shrink the poles back to its original
position.
*Due to ongoing design modifications, support brackets may be permanently fixed to the element