Heston Blumenthal Everdure HUB II, Инструкция по сборке, эксплуатации и обслуживанию

Страница: 5 / 24

5
Assembly, Operation & Maintenance Instructions
19. Do not use or store this appliance in areas of high salt content (a marine environment)
or an area with caustic fumes or liquids (such as a domestic pool), as these chemicals
can cause the appliance materials to deteriorate (and void the warranty). Regular
cleaning and covering with an Everdure by Heston Blumenthal HUB
TM
barbeque cover
can help can help to reduce this.
20. Caution: Accessible parts may become hot when used. Whilst the grill handles are cool
to touch, please be aware that the grill surface will be hot - handle with care.
21. Charcoal and coal products produce carbon monoxide when burned. When the
appliance is being used with solid fuels, always keep the appliance in a well ventilated
area to prevent the gasses produced from building up.
22. Do not use solid fuels impregnated with fire accelerants or use any other type of
accelerant on this appliance. This appliance is designed for electrical charcoal ignition
only. Using any accelerant could cause serious property damage or personal injury.
WARNING! Do not use spirit or petrol for lighting or re-lighting! Do not use firelighters
for lighting or re-lighting!
23. During ignition, follow the recommended charcoal area placement guide. Once the
initial batch of charcoal has ignited, it can be mixed in with fresh charcoal and spread
throughout the charcoal chamber. Overloading the charcoal chamber can result in
damage to the appliance and food – it is recommended that the height of the charcoal
never passes the top level of the charcoal chamber. For more information on charcoal
placement, see further on in the instruction manual and the Quick User Guide.
24. The ignition timer is set to 7 minutes. Whilst this in operation, the element will run,
heating and igniting the charcoal above it. Once the timer has finished, do not start
again as the heat from the element will interfere with the natural progression of the
charcoal ashing. Note: If the combined heat from the charcoal and element get too
high, an over-temp switch will disable the element (the timer will continue to operate
until the 7 minutes have elapsed).
25. Always allow the solid fuel to burn out naturally after cooking. Do not use any liquids
to douse the charcoal whilst inside the barbeque. Do not move the appliance while
the coals are still burning as hot ash, coal particles, unburned fuel and hot cooking fats
& oils could spill and accessible parts may be very hot. The barbeque should not be
moved by lifting.
26. Do not use volcanic rock or any type of non-combustible product in the charcoal
chamber. If in doubt on what fuels can be used, check the Everdure by Heston
Blumenthal website or contact the Service Department.
27. Solid fuels differ widely in burning time, heat, size and combustion. Always be aware
of your surroundings and potential fire hazards caused by sparks or spitting fuels.
Never dispose of solid fuels or hot ashes in areas where they can be trodden on or
be a fire hazard. Never dispose of unburned solid fuels or ash until it has completely
extinguished. The barbeque must be installed on a secure level base prior to use. We
recommend using 100% natural lump charcoal in this appliance (see everdurebyheston.
com.au/ everdurebyheston.com.nz).
28. Always check with your local/state authorities before using this appliance for any
fire restrictions regarding the use of an outdoor barbeque (due to local weather
conditions).
29. When using solid fuels, take care that the surrounding environment is clear of
combustible materials. Do not cook under overhanging buildings or close branches
of trees. Note that solid fuels will produce varying amounts of smoke – take this into
consideration when setting up the barbeque.