AN920
11
Power lamp
Power switch
SMA
connector
Mounting
bracket
Signal line
take-out hole
DC jack
Indicator
Side panel
Setting label
Option (with speaker) AN920R-MRD
3-2. AN920R
Item
Description
Mounting bracket
Use the mounting metal fittings for fixing the receiver.
SMA connector
Connects the included antenna.
Signal line take-out
hole
Connect the signal lines to the internal input/output terminal block by drawing them
through this takeout hole.
DC jack
DC jack for connection of the included AC adapter
Power lamp
Lamp for the power source. Lights up when the power source is switched on.
Power switch
Power switch of the main unit
Indicator
3 color LED (Green/ Orange/Red) The indicator lamp corresponding to the ID of the
transmitter received illuminates (or flashes).
Side panel
Remove the side panel to connect signal lines to the input/output terminal block or
configure channels/ indication mode/ unit/ set.
Setting label
Label showing factory default channel/ set/ unit.
e.g. “1-0-2”
:
Channel 1/ Set 1/ Unit 2
Speaker
An optional speaker can be installed on AN920RH-MRD.
Содержание AN920
Страница 2: ......