AN920
28
8-3. Sound Selection
The speaker sounds can be selected from 15 groups.
The receiver is shipped with a Shneider
’
s speaker
“
ST-25MM
”(
or
”
ST-25MM2
”)
connected as follows.
Output OC1: In synchronization with orange LED indication(button orange)
⇒
Connected to CH1 of the
speaker
Output OC2: In synchronization with red LED indication (button red)
⇒
Connected to CH2 of the speaker
Output OC3: In synchronization with green LED indication (button green)
⇒
Connected to CH3 of the
speaker
The speaker is prioritized. When signals are input simultaneously, the speaker sounds in the following
priority order.
CH1>CH2>CH3
To change the LED indicator color (Orange, Red, Green) and sound (and priority order), change the
connection of the terminal block inside the receiver.
The speaker sound can be selected from 15 sound groups A-O.
Select your desired sound group and set
the sound using the sound changeover switch of the speaker.
■ Settings of the speaker sounding time
The speaker playing time can be selected from continuous/ 5 sec. by the internal settings.
.
(For the setting method, refer to "5-2. Setting of indicator".)
*The speaker is set to continuous output setting at factory default.
*The speaker volume can be adjusted between 0 and 102dB without steps using the volume control.
Содержание AN920
Страница 2: ......