.
Additional Items Required ( Not Included in Kit)
Note: These are parts that we have used and are familiar with. There are many other brands available and you may substitute other items that
you are more comfortable with or have on hand.
1 Engine
.049 to .061 Engine with throttle
1 Radio
3 Channel Radio with Mini servos
3 Hinges
Sig Easy Hinges #SH-710
3 Pushrod Connectors
Sig #SH-736
2 Covering Material
2 Rolls Iron on covering material
2 3/32 Wheel Collars
Sig #SH-585
1 1/16 Wheel Collar
Sig #SH-584
2 Main Wheels
2 Du-Bro #200TL
1 Tail Wheel
3/4 Sullivan #351 T1 Tail Wheel
2 Wheel Bushings
Make from K&S Brass Tube #127
1 Motor Mount
Dave Brown #0506
4 Motor Mount Screws
4-40 x 3/4 Machine Screws and Blind Nuts Sig #SH-111
1 Fuel Tank
Sullivan 2oz. #SS-2
1 1/2-A Fuel Line
Sig #SH-288
1 Propeller
Grish Tornado 6-3 Nylon Propeller
#GRIQ1050
General Note: Cover the plans with wax paper before assembling your model to prevent the parts from sticking to the plan.
Building the Tail Surfaces
1.
Join R-1 and R-2 together over the plan to make the fin. Join R-3 and R-4 together over the plan to make the rudder.
Temporarily hinge the rudder to the fin. Do not glue the hinges at this time. Bend the tail wheel wire to shape and glue it into
position into the bottom of the rudder.
2.
Join S-2 and S-3 together over the plan to make the elevators. Join the elevators using the 1/8 dowel. Use the plan and the
stabilizer as a guide. Trim the dowel as required to achieve the proper length.
