Your kit contains the following parts. Please check your kit for any missing or damaged parts before starting construction.
COMPLETE KIT PARTS LIST
Wood Bag:
1 LC-510-01
3/32x4x24 Laser Cut Balsa Sheet
1 LC-510-02
3/32x4x24 Laser Cut Balsa Sheet
1 LC-510-03
3/32x4x24 Laser Cut Balsa Sheet
1 LC-510-04
3/32x4x24 Laser Cut Balsa Sheet
1 LC-510-05
3/32x4x24 Laser Cut Balsa Sheet
1 LC-510-06
1/8x4x24 Laser Cut Balsa Sheet
1 LC-510-07
1/8x4x24 Laser Cut Balsa Sheet
1 LC-510-08
1/16x4x12 Laser Cut Balsa Sheet
1 LC-510-09
1/16x3x12 Laser Cut Birch Ply Sheet
1 LC-510-10
3mmx6x12 Laser Cut Poplar Ply Sheet
1 LC-510-11
3mmx6x12 Laser Cut Poplar Ply Sheet 2 Leading Edge
1/4 sq.x24 Balsa Strip
4 Leading Edge Stringers
1/8 sq.x24 Balsa Strip
2 Wing Tips
3/4 Balsa Triangle x4.5
8 Trailing Edge
1/16x1x14 Balsa Sheet
2 Trailing Edge
1/16x1x3.5 Balsa Sheet
4 Center Section Sheet
1/16x3x18 Balsa Sheet
2 Control Surface Pushrod 1/16x18 Wire, Threaded One End
1 Throttle Pushrod
1/16x12 Wire, Threaded One End
1 Braces
3/32x3/16x8 Balsa Strip
4 Main Spars
1/8x1/4x24 Balsa Strip
4 Main Spars
1/8x1/4x13 Balsa Strip
2 Center Section Spars
1/4 sq.x3.5 Balsa Strip
2 Wing Strut
3/32x1/4x12 Balsa Strip
Misc. Parts Loose in Box:
1 Plan Sheet A
1 Plan Sheet B
1 Instruction Book
1 Decal Sheet
2 Main Landing Gear
7.625
1 Plastic Cowl
1 Clear Plastic
.010x3x6
Hardware Bag:
1 Left Hand Control Horn
Small Nylon Control Horn
1 Right Hand Control Horn Small Nylon Control Horn
4 Horn Screw
2-56x3/8 Machine Screw
1 Elevator Joiner
1/8x3 Birch Dowel
8 Main Landing Gear & Cowl Screw #2x3/8 Sheet Metal Screw
3 Nylon Clevis
Small Nylon Clevis
1 Nose Center Brace
3/16 sq.x3 Balsa
2 Wing Bolt Plates (F-20) 3/16 Laser Cut Ply
2 Wing Bolt Fillers
3/16 Tapered Balsa Wedge
1 Tail Wheel Wire
1/16 dia.x3 Music Wire
2 Wing Dowels
3/16x3/4 Birch Dowels
2 Wing Bolts
10-32x1 Nylon Bolts
4 Strut Wires
1/16x1.25 Mild Steel Wire
1 Strut Tubes
1/8x2 Plastic Tube
2 Landing Gear Straps
1/4x3/4 Nylon Strap
1 Tail Wheel Retainer
Black Nylon Retainer
