HERO ACHIEVER 150 Скачать руководство пользователя

Страница: 54 / 68

FRONT WHEEL REMOVAL

Remove the speedometer cable (1) by

pressing the tab (2) & pulling cable out

from the speedometer gearbox.

Remove the front axle nut (3).

Remove the axle and the wheel.

Remove the side collar from the wheel.

Raise the front wheel off the ground.

Position the front wheel between the fork

legs by aligning the slot on the speedometer

FRONT WHEEL INSTALLATION

Install the side collar (1) to the right side of

the wheel hub and then install the

speedometer gear box (2) on the left side

of the wheel hub.

CAUTION

Do not operate front brake lever when the

wheel is removed.

Raise the rear wheel off the ground.

Remove the rear brake adjusting nut (1)

and disconnect the brake rod (2) from the

brake arm (3) by pushing down the brake

pedal. Disconnect the brake stopper arm

REAR WHEEL REMOVAL

Tighten the front axle nut to the specified

torque.

After installing the wheel apply the brake

several times and then check if the wheel

rotates freely. Recheck the wheel if the

brake drags or if the wheel does not rotate

freely.

gear box with the lug on the fork leg and the

disc between the brake pads to avoid

damage to the pads. Insert the axle from the

right side through the fork legs and wheel

hub.

TORQUE : 5.9 kgf-m

(1) Side collar (2) Speedometer gear box

(1) Speedometer cable (2) Tab (3) Axle Nut

Содержание ACHIEVER 150





































































Результаты поиска

Содержание ACHIEVER 150

Отзывы:

Похожие инструкции для ACHIEVER 150

Бренды по названию

Популярные бренды

HERO ACHIEVER 150, Руководство пользователя

Результаты поиска

Содержание ACHIEVER 150

Отзывы:

Похожие инструкции для ACHIEVER 150

Бренды по названию

Популярные бренды