20
î
Clutch-
Check for smooth operation.
Adjust free play
(page 36 & 37)
.
You should conduct pre-ride inspection
before riding the vehicle to enhance riding
comfort and safety.
Clean your vehicle regularly. It protects the
surface finish. Avoid cleaning with products
that are not specifically designed for vehicle
surfaces.
î
Tyres-
Check condition and pressure
(page 43-46).
PRE-RIDE INSPECTION
î
Fuel level-
Ensure sufficient fuel is
available in your fuel tank for your journey
(page 18)
. Check for leaks.
Inspect your vehicle every day before you start
the engine. The items listed here will only take
few minutes, and in the long run they can save
time, expense, and possibly your life. Please
follow the tips as given below:
î
Front brake (Disc type)-
Check for
correct brake fluid level in the master
cylinder
(pages 39)
.
î
Front and
(Drum type)
Rear brake
-
Check operation. Adjust free play if
necessary
(pages 40-42)
.
î
Engine oil level-
Check and top up engine
oil if required
(page 29)
. Check for leaks.
î
Lamp and horn-
Check that headlamp,
tail/stop lamp, turn signal lamps, indicators
and horn function properly.
î
Drive chain-
Check condition and
slackness
(page
39)
. Adjust and
37-
lubricate if necessary.
î
Rear view mirror-
Ensure that the rear
view mirror gives a good rear view when
you are sitting on the vehicle.
î
Side stand indicator
-Make sure the side
stand is up. If it is in down position the side
stand indicator
(page 16)
will glow on
speedometer panel.
î
Fitting & fasteners-
Check & tighten if
necessary.
î
Throttle-
Check for smooth opening and
closing in all steering positions
(page 34)
.
î
Steering-
Check for smooth action for
easy maneuverability.
î
i3s Switch
-Make sure whether the i3s
switch is in “ON” or “OFF” position
(page 15).
î
i3s System
-Make sure that i3s system is
functional properly
(page 15).
î
Air suction valve
-Make sure all tube
connections are secured properly
(page 53)
.