Herni
III. Handling and functions of the basic seat
3.1 Adjusting the internal 5-point-belt
First select one of the two available positions for
the belt buckle ! For this purpose, the seat
cover must be loosened on one side to get to
the location underneath. Then put your child in
the car seat and make sure that it sits with the
hip at the back.
Now put the straps over the child's shoulders.
If the strap length is insufficient, lift the cover
and press gently on the metal rocker, so that the
straps in the shoulder area can be adjusted. Be
careful not to pinch the belt by pressing too
hard!
Then insert the two metal tongues into the belt
buckle until they click into place with a click.
Then tighten the strap system by pulling on the
narrow strap , which is located between the
legs of your child, until a stable position is found.
3.2 Using the separate adjusters
Optionally, it is possible to tighten the belt by
means of two separate belt adjusters. Instead of
pressing on the metal rocker , press the gray
button on the belt adjuster to loosen the belt
system.
Then pull on the strap end to adjust the straps
individually.
• Page 8 •
Содержание IPAI-NXT
Страница 1: ...Herni USER MANUAL version 01 2019...
