background image

6. Insert the diagonal belt (18) into the dark red 

belt holder (02) of the headrest (05) until it is 
completely and untwisted in the belt holder 
(02).

Tip!

 If the backrest (07) hides the belt holder 

(02), you can adjust the headrest (14) 
upwards. After you inserted the diagonal 
strap (18) you can set the headrest (05) back 
to the correct height.

7. Make sure that the diagonal strap (18) runs 

over your child's collarbone and does not 
touch the throat.

Tip! You can adjust the height of the headrest 

(05) also while the seat is in the car.

Before every drive, check that ...

►►

the child safety seat is securely fastened;

►►

the lap belt (17) runs on both sides of the 

seat cushion in the light red belt guides 
(01),

►►

the diagonal belt (18) on the side of the 

buckle (19) also runs in the light red belt 
guide (01) of the seat cushion,

►►

the diagonal strap (18) runs through the 

dark red belt holder (02) of the headrest,

►►

the diagonal belt (18) runs diagonally to 

the back,

►►

the straps are tight and not twisted,

►►

The car's buckle (19) is not in the light red 

belt guide (01) of the seat cushion.

Herni

I. General information

• Page 6 •

Содержание IPAI-NXT





















Отзывы: