Hernik IPAI-NXT, Руководство пользователя

Страница: 14 / 20

4.5 Abduction block
1. The abduction wedge helps your child to

reach a predetermined distance between the
knees. In order to loosen or tightening the 5-
point belt, the wedge must be removed.
Open the clamp and remove the wedge

upwards.
2. The wedge should be against the seat
upholstery as shown in the picture. The depth
of the wedge can be adjusted. For this
purpose, both hexagon screws must be
opened and offset under the seat.
3. The wedge should always be used while
driving (if chosen as an option), otherwise
your child could be injured by the mounting.
4. The lever can be changed in its position by

gently pulling it forward without moving the
screw connection. Make sure it is up and not
out of the way, otherwise your child's calves
may come into contact with it.
4.6 Angular adjustment
1. If the seat angle provided by the vehicle seat
is insufficient, the seat angle of the car seat
can be increased by the (extended) child seat
angle adjustment . For this purpose, the

screw left and right has to be opened and

another hole to be selected. Then tighten the
screws back.
2. For safety reasons, here is no quick release
possible!
Herni
IV. Using the optional accessories
• Page 13 •



