MY20H06-2_1.0_26.08.2019
65
Operation
6.10.1.2
Charging the battery on the pedelec
The drive unit is located on the pedelec.
Connect the charger plug to the pedelec
charging socket.
Figure 67: Drive unit (1) with battery level indicator (2),
charger plug (3) and connection cable (4)
Charging begins as soon as the charger plug is
connected to the charging socket on the
connected battery.
The charge level is displayed by the battery
level indicator on the battery. Every LED
represents 20 % of the capacity. Once 5 LEDs
are illuminated, the battery is completely
charged.
Once the battery is fully charged, the LEDs on
the battery level indicator go out. You can
check the charge level by briefly pressing the
On-Off button on the battery.
Once charging is complete, unplug the charger
from the mains and the battery from the
charger.
6.10.2 Inserting the battery into the drive
unit
Figure 68: Inserting the battery into the drive unit
To insert the battery (4) into the drive unit (2),
hold the drive unit (2) in one hand and the
battery (4) in the other. Make sure that the
discharging socket is positioned towards the
battery holder (3).
Connect the two components by carefully
inserting the battery (4) into the battery holder
(3) on the drive unit (2).
Once the battery (4) is fully inserted, the
battery (4) is automatically locked by the
battery lock (1).
1
2
3
4
Notice
Dirt causes friction when inserting the battery into
the drive unit and complicates the process.
Always clean the battery (1) and drive unit (2)
before use and maintain a clean condition.
1
2
3
4
