Disassembly / assembly
53
9.
Important!
- Make sure you degrease the shaft surface!
- The pretension of the spring is obtained through the instal-
lation of the impeller.
Carefully slide the rotating
sliding ring with bellows and
spring over the motor shaft
shoulder using an assembly
aid (accessories) and up to
the integrated counter ring.
10.
Insert the key (940) into the
motor shaft groove.
11.
Slide the impeller (230) onto
the motor shaft (819).
12.
Slide the washer (554) onto
the motor shaft (819).
13.
Tighten the nut (920).
14.
Place the gasket (400.2)
between the pump casing
(101) and the intermediate
casing (113). Then insert the
complete interchangeable
module into the centering of
the pump casing.
15.
Screw the pump casing (101)
to the intermediate casing
(113).
16.
Undo the screw (900) and
remove with the sealing
washer.
17.
Undo and remove the cap
on the Seal-Guard-System
compensation tank.
18.
Important!
- The pump must stand vertically.
- Use medical white oil.
- Do not mix different types of oil.
Fill oil into the opening of the
Seal-Guard-System compen-
sation tank. The required oil
quantity has been reached as
soon as oil escapes from the
screw opening (900).
Содержание herborner.X
Страница 4: ......
