Heras sGate Trackless, Руководство пользователя

Страница: 25 / 66

EN – Translation of the original user manual - 3.0 | 2018
25
used)
F067 Safety loop 3 defect Short circuit or interruption of loop 3
F068 Safety loop 4 defect Short circuit or interruption of loop 4
F080 Perform maintenance Service counter has reached maintenance
status
F090 Set control parameters The minimum basic parameters are not
set in the control system
F201 Internal emergency stop
active or watchdog ac-
tive
Check the internal emergency stop wiring,
test the microprocessor by pressing the
stop sheet, it will display Information
about the possible cause
F211 External emergency stop
1
Check external emergency stop
wiring of 1
F212 External emergency stop
2
Check external emergency stop
wiring of 2
F320 Gate blocked during
opening
The gate is stopped during opening
F325 Gate blocked during clo-
sing
The gate is stopped during closing
F360 to
F364
Safety edge 1 is malfunctioning
F370 to
F374
Safety edge 2 is malfunctioning
F400 RAM error Reset FUE/FUZ
F04B Communication error
expansion print
Communication between main print and
expansion print is interrupted.
F410 Overcurrent limit ((mo-
tor current or DC link)
Motor data set incorrectly
sGate is running too sluggishly
F420 Overcurrent DC link 1 Braking chopper malfunctioning / defect /
not present
Mains voltage too high
Motor returning too much energy (gen-
erator effect). E.g. when gate is closed