Heras sGate Trackless, Руководство пользователя

Страница: 24 / 66

EN – Translation of the original user manual - 3.0 | 2018
24
Appendix B: Overview of error messages
P920 Read out fault history
F000 Door open outside posi-
tion
Parameter value emergency limit switch
Limit switch open range too small
The mechanical brake is defective or set
incorrectly
F005 Door closed outside posi-
tion
Parameter value emergency limit switch
Limit switch open range too small
The mechanical brake is defective or set
incorrectly
F020 Running time exceeded
during opening or closing
or in hold to run mode of
control
Current motor has exceeded a set maxi-
mum running time
The gate runs with difficulty or is ob-
structed
If mechanical limit switches are used, a
limit switch may be defective
If an encoder is used, this fault is virtually
impossible
F030 Gate runs slowly, the
change in position is
slower than expected
Axle of the encoder on the motor is loose
Wrong positioning system has been se-
lected.
Motor phase is missing
Motor brake is not released
Error recognition setting too small
Movement speed too low
Mechanical limit switch remains active or
is defective
F031 Reversal time error at
DES
Wrong direction of rotation
In the selection of the encoder, an incor-
rect channel has been selected. A with B
were switched (pulse generators are not