7
English
• Only use attachments recommended or
sold by the manufacturer.
• Do not abuse cord or charger. Never use
the cord to carry the charger. Do not pull
the charger cord rather than the plug
when disconnecting from outlet. Replace
damaged cords immediately.
• Make sure cord is located so that it will
not be stepped on, tripped over, or come
in contact with objects that would
subject it to damage or stress.
• Keep charger and cord away from heat
to prevent damage to housing or internal
parts.
• Do not allow gasoline, oils, petroleum-
based products, etc. to come in contact
with plastic parts.
• DO NOT operate charger if it has been
dropped or damaged in any way
(including damaged cord or plug). Have
serviced by an authorized technician.
• Do not disassemble charger. If service is
needed, contact Customer Service and
have repaired by an authorized
technician.
• Disconnect the charger from electrical
outlet when not in use and before
attempting any maintenance or cleaning.
• DO NOT touch the uninsulated part of the
output connector or uninsulated battery
terminal.
• Keep charger clean and free from dust a
dirt. Follow all safety warnings when
cleaning the charger.
Use only with battery packs and chargers
listed below.
BATTERY PACK
CHARGER
H36B25,H36B50,
H36B75
H36KC400
H36MC100
(XVE129-
4200300)
4. Intended use
Charger for charging HENX 40V batteries.
5. Specifications
Charger (model)
H36KC400
Input
100-240VAC 50-60Hz, 400W
Output
40VDC, 8A
Standard-Charge time
Approximately
46 minutes for H40B25 battery pack,
71 minutes for H40B50 battery pack,
87 minutes for H40B75,
180 minutes for H40B200 battery
Allowable charge
temperature range
32°F-104°F (0°C-40°c)
Charger Weight
1.67 lb. (0.76 kg)
Charger (model)
H36MC100(XVE129-4200300)
Input
100-120VAC, 50/60Hz, 2.5A Max;
Output
42.0VDC, 3A
Standard-Charge time
Approximately
50 minutes for H40B25 battery pack,
107 minutes for H40B50 battery pack,
162 minutes for H40B75S
