5
English
INTRODUCTION
Congratulations on your selection of one
the HENX 40-Volt chargers. It has been
designed, engineered and manufactured to
give you the best possible dependability and
performance.
For use with the HENX 40V 2.5Ah, 5.0Ah,
7.5AH battery packs (H36B25,H36B50,
H36B75).
BATTERIES SOLD SEPARATELY
Should you experience any problem you
cannot easily remedy,please contact HENX
customer service 800 - 86286286.
Keep this manual nearby so you can refer to
it at any time.
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
Safety, performance, and dependability
have been given top priority in the design of
this product making it easy to maintain and
operate.
WARNING:
Some dust created by power
sanding, sawing, grinding, drilling and other
construction activities contains chemicals
known to the state of California to cause
cancer, birth defects or other reproductive
harm. Some examples of these chemicals
are:
• Lead from lead-based paints
• Crystalline silica from bricks and cement
and other masonry products, and
• Arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures varies,
depending on how often you do this type of
work. To reduce your exposure to these
chemicals: work in a well ventilated area,
and work with approved safety equipment,
such as those dust masks that are specially
designed to filter out microscopic particles.
1. Safety guidelines
Safety symbols
The purpose of safety symbols is to attract
your attention to possible dangers.
The safety symbols and the explanations
with them deserve your careful attention
and understanding. The symbol warnings
do not, by themselves, eliminate any danger.
The instructions and warnings they give are
no substitutes for proper accident
prevention measures.
WARNING:
Be sure to read and understand
all safety instructions in this.
Operator’s Manual, including all safety alert
symbols such as
“DANGER,” “WARNING,”
and
“CAUTION”
before using this tool.
Failure to following all instructions listed
below may result in electric shock, fire, and/
or serious personal injury.
WARNING:
To ensure safety and reliability,
all repairs should be performed by a
qualified service technician.
Damage prevention and information
messages
These inform the user of important
information and/or instructions that could
lead to equipment or other property damage
if they are not followed.
Each message is preceded by the word
“NOTICE”,
as in the example below:
NOTICE:
Equipment and/or property
damage may result if these instructions are
not followed.
WARNING:
The operation of any power
tools can result in foreign objects being
thrown into your eyes, which can result in
severe eye damage. Before beginning power
tool operation, always wear safety goggles
or safety glasses with side shields and a full
face shield when needed. We recommend a
Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with
side shields. Always use eye protection
which is marked to comply with ANSI Z87.1.
WARNING:
Risk of fire and burns. Do not
recharge, disassemble, heat above 100 °C
(212 °F), or incinerate. Keep battery out of
reach of children and in original package
until ready to use. Dispose of used batteries
promptly according to local recycling or
waste regulations.
