ORDERING PARTS
This section identifies and lists the replace-
able parts of the Henny Penny staging
cabinet.
Use only genuine Henny Penny replace-
ment parts in your cabinet. Using a substi-
tute design may result in cabinet damage or
personal injury.
To find items you want to order from the
Parts List, proceed as follows:
1. Refer to the photographs in the front of
the Operating Procedures section to
identify the part needed.
2. Use the item number from the photos
then locate the corresponding part in the
parts list below the photo. In this list will
be the Henny Penny part number and a
description of the part.
3. Label and disconnect the wires to the
relay.
4. Remove the nuts securing the relay and
remove the relay from the panel.
5. Install new relay in reverse order.
How to Order
Once the parts you want to order have been
found in the parts list, write down the following
information:
1. From the photography and parts list:
Item Number ________________________
Part Number ________________________
Description _______________________
2. From the data plate:
Product Number _____________________
Serial Number ____________________
Voltage ____________________
3. The following table has been provided as a
sample format for you to use in preparing
your spare parts orders. By providing all the
entries, your distributor will be able to
ensure the correct parts will be sent to you.
Commonly replaced items are stocked by your
distributor and will be sent when your order is
received. Other parts will be ordered by your
distributor from Henny Penny Corporation.
Normally, these will be sent to your distributor
within 3 working days.
Refer to the warranty statement found at the
beginning of this manual.
FROM PARTS LIST
YOUR ORDER
Item
Part
Quantity
Number
Number
Description
Ordered
Price Each
Total
Product No. ________________ Serial No. ___________________ Voltage ________________
Fill-in for your records
20
