Mug Warmer
IMPORTANT
SAFEGUARDS
When using electrical appliances, basic safety
precautions should always be followed including
the following:
1. Read all instructions.
2. Do not touch hot surfaces. Use handles or
knobs.
3. To protect against electrical hazards, do not
immerse cord, plugs or the appliance in water
or any other liquid.
4. Close supervision is necessary when any
appliance is used by or near children. Children
should be supervised to ensure that they do
not play with the appliance.
5. This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities or lack
of experience and knowledge, unless they have
been given supervision or instruction
concerning the use of the appliance by a
person responsible for their safety.
6. Unplug from outlet when not in use and before
cleaning. Allow to cool before putting on or
taking off parts and before cleaning the
appliance.
7. Do not operate any appliance with a damaged
cord or plug or after the appliance malfunctions
or has been damaged in any manner. Return
appliance to Salton for examination, repair or
adjustment. See Warranty.
8. All servicing, other than cleaning, should be
performed by an authorized service
representative. See Warranty section.
9. The use of accessories or attachments not
recommended by Salton may cause hazards.
10. Extreme caution must be used when moving
an appliance containing hot liquids, including
wax.
11. When using candles, use only tempered glass
or metal containers, containers get hot.
Watch carefully.
13. WARNING: Do not light the wick of the candle
when using the Warmer.
14. Remove the cover of the candle when using
the Warmer.
15. Do not use outdoors.
16. Do not let cord hang over edge of table or
counter or touch hot surfaces.
17. Do not place on or near a hot gas or electric
burner or in a heated oven.
into the wall outlet. To disconnect remove the
plug from the wall outlet and then remove other
end from appliance.
19. Do not use appliance for other than its
intended use.
20. Do not leave unit unattended while in use.
SAVE THESE
INSTRUCTIONS
HOUSEHOLD USE ONLY
POLARIZED PLUG
This appliance has a polarized plug (one blade is
wider than the other). To reduce the risk of electric
HOW TO USE
This product is designed to keep hot beverages
at the right drinking temperature, warm candles
to release their aroma or keep gravy at the correct
serving temperature.
Mug or Gravy:
1. Place the mug warmer on a level, heat and
stain resistant surface.
2. Simply set your cup or mug (glass or ceramic),
on the black warming surface of the mug
warmer. Use a gravy boat that sits level on the
black warming section of the mug warmer. Do
not use a gravy boat that is on a stand.
3. Plug into the nearest 120 volt wall electrical
outlet.
N
O
e
h
t
o
t
h
c
ti
w
S
f
f
O
/
n
O
e
h
t
n
o
l
e
e
h
w
e
h
t
n
r
u
T
.
4
position - it will click as it switches between ON
and OFF. The indicator light on the unit will glow
when it is in the ON position.
IMPORTANT NOTES:
•
This appliance is not intended for use with
plastic or Styrofoam cups.
•
This appliance is not intended to heat a
beverage, only to maintain a drinking
temperature.
•
This appliance will remain ‘ON’ until it is
switched to the ‘OFF’ position and the indicator
light is out. Unplug when not in use.
Candle:
1. Place the mug warmer on a level, heat and
stain resistant surface.
2. Remove the lid from the candle before
warming.
3. Please the candle, in a tempered glass or
ceramic holder on the black warming surface.
4. Plug into the nearest 120 volt electrical wall
outlet.
N
O
e
h
t
o
t
h
c
ti
w
S
f
f
O
/
n
O
e
h
t
n
o
l
e
e
h
w
e
h
t
n
r
u
T
.
5
position - it will click as it switches between ON
and OFF. The indicator light on the unit will glow
when it is in the ON position.
IMPORTANT NOTES:
•
If the candle is not melting make sure that the
indicator light is on and that the candle jar lid
has been removed.
Model: SMW12 / BK
12. Some candles tend to overflow when melted.
18. Always attach plug to appliance first then plug
shock, this plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a .
qualified electrician. Do not modify the plug in any
way.
