![background image](http://html1.mh-extra.com/html/true/ta2hrt-2s-2s/ta2hrt-2s-2s_specifications_1174402001.webp)
Specifi cations subject to change without notice.
Chart dimensions rounded up to the nearest
1
/
8
"
(millimeters rounded up to next whole number)
.
ROUGH-IN DATA
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366
(636)240-2400 • Fax (636)272-2408 • (800)325-6152 • Intl Fax# (001)636-272-7546
Parts Dept. (800)424-TRUE • Parts Dept. Fax# (636)272-9471 • www.truemfg.com
Model:
TRUE FOOD SERVICE
EQUIPMENT, INC.
Project Name:
Location:
Item #:
Qty:
Model #:
AIA #
SIS #
Printed in U.S.A.
APPROVALS:
AVAILABLE AT:
T
RUE
R
EFRIGERATION
MADE IN
SINCE 1945
U.S.A.
.S.A.
TM
U.S.A.
TA2HRT-2S-2S
TA2HRT-2S-2S
7/07
Provides cabinet holding
temperature of 80°F to 180°F
(26.6°C to 82.2°C).
Equipped with low-velocity fans
to assure even temperature
distribution throughout the
cabinet. Fans are controlled by
exterior on/off switch.
Two (2) stainless steel, fi nned tube
heating elements (1000 watts each)
per section for uniform generation
of electric heat. Cabinet comes
with a total of 4000 watts.
300 series stainless steel exterior
front, sides, back and bottom. The
very fi nest stainless with higher
tensile strength for fewer dents and
scratches.
Anodized aluminum interior
cabinet liner. 300 series stainless
steel door liner and fl oor with
coved corners.
Three (3) lifetime guaranteed, cam-
lift hinges per door. Full 180° open
capability with a stay open feature
at 120°.
Designed to accept roll-in racks
(inboard castors) with a maximum
dimension of 27"L x 29"D x 66"H
(686 mm x 737 mm x 1677 mm).
One (1) heavy gauge stainless steel
ramp standard per door.
Entire cabinet structure and solid
doors are foamed-in-place using
high density, CFC free, polyurethane
insulation.
TA Specifi cation Series:
Roll-Thru Solid Door Heated Cabinet
R
®
Model
Doors
Capacity
(Cu. Ft.)
(liters)
Cabinet Dimensions
(inches)
(mm)
L
D
†
H
*
Watts
Voltage
Crated Weight
(lbs.)
(kg)
TA2HRT-2S-2S
4
75
2124
68
1728
36
7
/
8
937
83
3
/
4
2128
4000
115/208-240/60/1
706
321
†
Depth does not include 4
1
/
4
"
(108 mm)
each side for ramps.
*
Height does not include 1"
(26 mm)
for system mechanical components.
Requires hard wiring of 115/208-240/60 Hz, single phase, 3 pole, 4 wire circuit.