2. Remove the screws securing the front
panel.
3. Carefully pull the blue beeper straight
back off of the control board.
4. Line up prongs of new beeper with the
terminals on the control board and firmly
press beeper onto board.
5. Replace screws in the front panel and
restore power to the unit.
TRANSFORMER REPLACEMENT
Tool:
Phillips screwdriver
1. Disconnect the electrical supply to the
cabinet.
WARNING: Place the power switch in
the OFF position and unplug the power
cord. Failure to do so could result in
electrical shock.
2. Remove the module housing.
3. Label and remove the wires from the
transformer.
4. Remove the two screws securing the trans-
former to the unit and remove the trans-
former from the unit.
5. Install the new transformer in reverse order
and restore power to the unit.
BLOWER REPLACEMENT
Tools:
Phillips screwdriver
1. Disconnect the electrical supply to the
cabinet.
WARNING: Place the power switch in the
OFF position and unplug the power cord.
Failure to do so could result in electrical
shock.
2. Remove the access panel from the module.
3. Disconnect the wires to the blower.
3. Remove the three screws securing the
blower motor to the housing and pull the
motor from the housing.
17
